How to Make Your Used Vehicle Last Longer

How to Make Your Used Vehicle Last Longer

Every automobile comes with a factory-recommended schedule for routine vehicle maintenance like oil changes, tire rotations and tune-ups. One of the best things you can do for your used vehicle to make it last longer is to follow this schedule. These visits to your Winston-Salem auto repair shop also enable the experts to find signs of problems early. As a result, you can avoid costlier repairs and keep your used car or truck running its best for much longer.

Follow the Regular Vehicle Maintenance Schedule

Some of this routine vehicle maintenance includes:

Pay Attention to Alerts and the Check Engine Light

All of those gauges and lights on your dashboard are there for a reason. They serve to help you know when something is wrong with your car before a system breaks down. You should never ignore the check engine light or other alerts, just hoping the light will turn off and the problem will go away. In fact, doing so can lead to expensive problems, a breakdown and a shorter life span for your vehicle. Getting service quickly will avoid such issues and help you make your used vehicle last longer.

Maintain Fluid Levels and Filters

Engines have many moving parts that require fluids and filters to run properly. These fluids include engine oil, coolant and transmission fluid. Without routine vehicle maintenance, these fluids run out. They can also accumulate debris that can damage components. As a result, your engine could experience irreparable problems and your used vehicle will not last long. Take your vehicle to Cloverdale Auto on a regular schedule to check levels, change fluids and change filters.

Rotate Tires and Inspect Them Regularly

Your tires are one of the most important parts of your vehicle. They are essential for safety, handling, acceleration, braking, fuel efficiency and comfort. Still, many people neglect their tires until there is a problem.

To make your used vehicle last longer, it is critical that you keep your tires in good shape. Do this by having the auto repair pros of Cloverdale Auto inspect, rotate, align and replace your tires regularly. Also look for signs of problems like low pressure, uneven wear and excessive wear.

Use Quality Parts and Fluids

Avoid the temptation to buy your auto parts and fluids from internet discounters. Instead, use the quality parts and fluids recommended by your manufacturer, those also used by your auto shop in Winston-Salem. Use the manufacturer recommended fuel at the gas pump, too. Following this advice will undoubtedly help your used vehicle last longer and keep running like new.

Practice Good Driving Habits

How you drive can wear and tear on your used vehicle and its working parts. Some of the behaviors that damage your vehicle over time include:

  • Fast driving
  • Rapid acceleration
  • Rapid braking
  • Sharp cornering and abrupt lane changes
  • Short trips less than a mile in duration
  • Not letting the engine warm up before driving away

When behind the wheel, avoid being aggressive or reckless. You will enjoy a smoother, trouble-free ride for longer and can also avoid getting into accidents.

Keep It Clean

Keeping your used vehicle clean actually plays a role in how long it lasts, too. Wash the exterior as needed and keep it waxed to avoid environmental damage to the paint and body. Vacuum the interior to help it stay fresh and looking good. Also try to keep your vehicle parked in a garage away from climate conditions. This helps keep the fluids, mechanical parts and electronics working in top form.

Involve Your Auto Shop in Your Plan to Make Your Used Vehicle Last Longer

One of the best things you can do to keep your used vehicle longer is to ask your auto mechanic for advice. Tell them you want to keep your car as long as possible. Ask your mechanic what steps you should take next to ensure it runs great for years to come. They may recommend specific part replacements or services to help you stick to your plan.

Schedule your next vehicle maintenance service at Carolina Auto Service in Winston-Salem today. Our trusted mechanics will inspect your vehicle, provide routine maintenance and explain what your used vehicle needs to keep running its best. Call us at 336-765-8599.

car emitting smoke

Holy Smokes: Why is My Car Emitting Smoke?

car emitting smokeOne of the most obvious, telltale signs your car, truck, or SUV is in need of serious repair or service is smoke. Unless you’re 100-percent sure as to why your vehicle is emitting smoke and whether it is safe to operate, you should get it off the road as soon as possible. Driving a smoking automobile can further exacerbate any damage, leading to costly breakdowns, repairs, and even extremely dangerous engine fires. The type of smoke your car or truck is discharging helps identify the underlying mechanical issue causing your vehicle to smoke. The first thing you should do if you notice your car emitting smoke is bring it into a reputable automotive repair center like Carolina Auto Service and have it checked out by a certified mechanic.


In terms of dealing with a car emitting smoke, the best-case scenario is coming across vapor. Often mistaken for white smoke, the vapor is actually condensation or steam naturally released from the engine’s exhaust. It is completely normal for even brand new cars to release vapor from their exhaust when starting their engines. This especially true in colder climates or in vehicles that haven’t been driven in a while. If it isn’t clear whether your automobile is emitting smoke or vapor, or if you feel your car is releasing an excessive amount of condensation, you should definitely have it inspected by a quality mechanic right away. Here at Carolina Auto Service, our ASE-certified automotive technicians will ensure the vapor coming out of your car’s exhaust is simply normal condensation and not something more serious like burning coolant, which is a sign of major engine trouble.

White Smoke

If thick white smoke is consistently pouring out of your automobile’s exhaust or from under the hood, it usually signals your vehicle is burning coolant and is most likely suffering from one of these significant engine issues:

  • Coolant Leak
  • Blown Head Gasket
  • Cracked Engine Block
  • Damaged Cylinder Head

If you suspect your car or truck is experiencing any of the above problems, do not drive it in to get repaired. Driving an automobile that is burning coolant will inevitably overheat causing even further irreparable engine damage. It may even trigger an engine fire. Rather than risking a high-priced engine replacement as well as your own safety. The automotive professionals at Carolina Auto Service recommend towing any car emitting smoke in for repairs, even if it is “technically” capable of starting and driving.

Black Smoke

Thick black smoke billowing out of your car or truck’s tailpipe typically indicates your vehicle is burning an excessive amount of fuel. While normally not as serious as white smoke. The presence of black smoke probably means your automobile is experiencing one of the following problems:

  • Clogged or Dirty Air Filter
  • Clogged or Leaking Fuel Injectors
  • Damaged Sensors or Regulators
  • Damaged Carburetor (in carbureted vehicles)
  • Poor Air to Fuel Ratio Mixture (in diesel vehicles)

Sometimes older vehicles will send out a cloud of black sooty smoke when starting up. This is fairly normal as long as all of its engine components are in working order. The smoke quickly dissipates. While some of the causes of black smoke emissions only require simple, do-it-yourself fixes, the auto experts at Carolina Auto Service strongly advise bringing your vehicle into a reliable mechanic anytime you’re dealing with a car emitting smoke.

Blue or Gray Smoke

The most common reason for an automobile to be spewing out blue or gray smoke is burning oil. Blue or gray smoke is commonly associated with the unmistakable smell of burning oil as well as significant drops in a vehicle’s oil level, without any noticeable leaks. Blue or gray smoke emissions due to burning oil can stem from a variety of mechanical difficulties such as:

  • Too Much Oil or Overfilled Oil
  • Spilled Oil During a Recent Oil Change
  • Oil Leak in Combustion Chamber
  • Clogged Oil Lines
  • Damaged Valve Seals
  • Damaged Piston Rings
  • Transmission Fluid Leak
  • Damaged Transmission Modulator Vacuum
  • Damaged Turbocharger (for turbocharged vehicles)

You will definitely want to bring your vehicle in to an automotive expert if you notice any persistent blue or gray smoke emitted from its exhaust. While the presence of blue or gray smoke can be caused by something as minor as spilling a little oil on the engine during your last oil change, it can also signify something major like worn out seals and rings, a faulty transmission or a failing turbocharger (for turbocharged vehicles).

Hybrid & EV Electric Vehicles

Hybrid automobiles are subject to the same smoke-related mechanical issues as traditional gas and diesel, cars and trucks. Also, hybrid cars along with EV electric vehicles must also contend with the potential for smoke. Even fire stemming from their battery or other damaged electrical components overheating. It is especially alarming to see any type of smoke emitted from a fully electric EV, since they don’t burn fuel. Aren’t constructed with any type of exhaust system. If you’re in need of high quality, hybrid auto service in the Winston-Salem, North Carolina area. Look no further than Carolina Auto Service, we’re conveniently located on South Stratford Road near Interstate 40.

Here at Carolina Auto Service our team of friendly, ASE-certified automotive technicians can quickly. Accurately, diagnose the root mechanical issue(s) of any car emitting smoke, while promptly providing honest, reliable, service and repair. Not only do we specialize in servicing and repairing smoking cars, trucks and SUVs, we’re also a North Carolina State authorized automotive emissions testing center. For more information regarding a car emitting smoke. To set up an obligation-free appointment. Contact us today or drop in for a visit.

Get a Flat Tire

What to Do If You Get a Flat Tire in Winston-Salem

Get a Flat TireWhether it happens on the road, or while parked, odds are most North Carolina motorists have likely experienced the unwanted hassle of getting a flat tire. There are a variety of factors that can cause a flat tire, such as running over a nail or other sharp object, as well as damage from the elements, which causes a tire to prematurely age and crack. Poor alignment, hard impact due to an accident or pothole, as well as a tire simply reaching the end of its tread life are other common reasons why tires go flat. While there are a myriad of ways to get a flat tire, the solution is always the same. This month’s blog focuses on what to do if you get a flat tire in Winston-Salem.

Step 1: Remain Calm

Getting a flat tire is never fun. It can be an unsettling experience especially if it happens at night, in adverse weather conditions or in a hostile environment. The first thing to do if you get a flat tire is to remain calm. Panicking or getting upset will only make a bad situation worse and will negatively affect one’s judgement and decision-making ability.

Step 2: Pullover

If you get a flat tire while driving, safely pull over. If possible, try to pick a well-lit, flat area, safe from on-coming traffic. Remember that you will need to find a space that at a minimum provides enough room to change a tire, as well as possibly accommodating another vehicle. Don’t forget to set your parking brake and turn on your hazard lights as well.

Step 3: Call Roadside Assistance (if applicable)

In the event of a flat tire, calling roadside assistance is the easiest and most convenient way of resolving the problem. Most car insurance providers include a number of free roadside assistance calls with their coverage plans free of charge. If you get a flat tire in the Winston Salem NC area and need help, don’t hesitate to contact us at Carolina Auto Service.

Step 4: Do-it-Yourself

Not everybody has access to roadside assistance. Some may have already used their complimentary calls provided by their auto insurance companies or prefer to save them for a more perilous situation. Some of us simply prefer to change our own tires. If you are willing to get your hands dirty and have all the necessary equipment, you can save yourself the time and hassle of waiting for help to arrive. This is especially true if you get a flat tire late at night as well as an isolated or unsafe location.

How to Replace Your Flat Tire

  • You will need: road flares or reflective triangle mobile hazard signs, flathead screwdriver, lug wrench
  • If necessary set road flares or reflective triangles to alert other motorists.
  • Remove the hubcap or wheel center cap with a flathead screwdriver, if applicable.
  • Before jacking the vehicle, loosen the wheel’s lug nuts with the lug wrench. It is much easier to loosen the lugs when the vehicle is on the ground. Do not remove the lugs, simply loosen them.
  • Locate your vehicle’s hard point closest to the flat. Find a flat, solid metal point under the edge your car or truck’s frame closest to the flat. Many automobiles have marked designated jack points. If you really aren’t sure where to set the jack, you can use the end of the vehicle’s axel closet to the flat.
  • Position the jack correctly and slowly raise the car or truck. Stay alert for any movements or sounds that may indicate the jacked vehicle is unstable and might collapse.
  • Remove lug nuts from the flat tire’s wheel and remove the flat tire and replace it with the spare.
  • Tighten the lugs with the lug wrench then lower the car or truck back to the ground. Once the vehicle is stable, tighten the lugs with the lug wrench.

Step 5: Follow-up

Don’t be that person riding around on a spare tire donut for way too long. Spare tires were designed to be used “sparingly”. Even if your spare tire is a full size additional tire, driving for an extended period of time on your full-size backup leaves you vulnerable in the event of another flat tire. If you get a flat tire, make sure to make any necessary repairs or replacements as soon as possible.

To maximize performance and longevity from your tires, make sure to maintain them at the proper, manufacturers specified, air pressure level. Regularly scheduled tire rotations, along with routine balances and alignments are also essential when it comes to getting the most out of your automobile’s tires. If you have further questions regarding changing a flat, or tire care in general, feel free to contact us. If you would like to have one of our friendly, ASE-certified automotive technicians take a closer look at your vehicle’s tires or need service, drop by for a visit or set up your appointment today. We’re conveniently located in Winston-Salem, NC on South Stratford Road near Interstate 40. For other useful tips and repairs such as Timing Belt Replacement, and Water Pump Replacement contact us today!

Dead Car Battery

Dead Car Battery: How to Fix

Dead Car BatteryAccording to the AAA, a dead car battery is the number one reason American motorists call for roadside assistance. If your car or truck won’t start, more often than not, the battery is dead. Dead car batteries are especially prevalent in the age of Covid social distancing. Where cars, trucks, and SUVs are driven less frequently, or not at all. Whether it’s due to drivers being out of work, working-from-home, schools. Businesses being closed or simply not having the money. People just aren’t driving as much as they used to. A decrease in overall driving activity increases the risk of a dead car battery. This is due to a reduction in the charging it receives from the engine’s alternator as a result of regular driving.

What to Do About A Dead Car Battery


The most common method drivers cope with a car or truck that won’t start due to a dead battery is a jump-start. Keeping a set of jumper cables in your trunk is always a good idea. If you do not have access to any, you may be able to flag down a fellow motorist. Make sure to use your best judgement and approach any individuals on the road with caution.

After popping open the hood of both vehicles, first connect the red positive clamps to the red positive terminals on both auto batteries. Then connect the black negative clamp to the black negative terminal on the vehicle with the fully functioning battery that will be doing the jumping. Next, attach the remaining black negative clamp to any paint-free metal part or surface within the engine block. After first starting the working vehicle and letting in run a minute or two, you will then attempt to start the vehicle with the dead car battery. If it starts, make sure to drive around for a recommended 30-minutes or more, to sufficiently charge the battery via the engine’s alternator.

Roadside Assistance:

If you do not possess the necessary tools or are unable to find anyone to help, most likely you will need to call for roadside assistance for a jump-start or tow. If you are in the Winston-Salem area and you experience a dead car battery feel free to contact us here at Carolina Auto Service. We offer 24-hour a day, seven days a week roadside assistance service to assist with any battery, mechanical or any other automotive-related difficulty you may encounter on the road.


If you consider yourself fairly handy, and have the necessary time and resources available, servicing or replacing your vehicle’s battery can be done as a do-it-yourself fix. First, you will need a multimeter, a handheld electronic device used for measuring electric current. After setting the multimeter to the 15 to 20-amp setting, connect the red positive and black negative contacts to the corresponding positive and negative terminals on the car battery. Did the reading registers below 12.5 amps? You will want to either charge or replace your battery depending on its overall condition and lifespan.

While your vehicle’s alternator maintains your car or truck’s battery charge through regular driving, it was never designed to fully charge the battery; for that, you will need a dedicated car battery charger. If you’ve properly charged your vehicle’s battery and it is still experiencing power loss or failure to start, then it will need to be replaced. The easiest way to figure out which battery to buy is by referencing your vehicle’s owner manual, or simply popping open the hood and taking a look. It is essential you choose the correct size and power rating. The main units of measurement when it comes to rating an automotive battery is Cranking Amps (CA), the amount of electric amperage it takes to start a vehicle at 32-degrees Fahrenheit, along with Cold Cranking Amps (CCA), the amperage required to start an automobile at zero-degrees Fahrenheit.

Dead Car Battery Causes


Leaving your automobile’s headlights or interior lights on for an extended period of time. This is a great way to return to a car or truck with a dead car battery that won’t start.

Air Conditioning

Operating your vehicle’s air conditioning. Also, climate control system is a major drain on the battery and consumes even more battery life and fuel when used with the engine running.

Electronic Devices

Any electronic device such as your automobile’s entertainment, GPS, keyless entry, security and other systems consume electricity, especially when the engine is not running and will increase the likelihood of a dead car battery.


Under normal conditions, regular driving is usually enough to maintain a charge in most automotive batteries. Infrequent driving, or not driving at all will gradually deteriorate your car or truck’s battery, draining its energy along with reducing its overall longevity. Did you plan to store a vehicle long-term? You may want to consider disconnecting your vehicle’s battery cables to prevent excessive energy loss.


Extreme weather conditions will prematurely age your automobile’s battery. Accelerating the time between battery replacements. Also, well as increasing the likelihood of being strand due to a dead car battery. Scorching hot weather causes battery fluid to evaporate. This reducing its ability to charge as well as emitting an unpleasant sulfur odor. On the other hand, cold temperatures diminish a battery’s capacity to transfer electric current. As evidenced by the difficulty of starting a car in cold climates.

Old Age

The average car battery lasts roughly three to five years. Did you notice significant levels of corrosion? Leaking fluid, a foul sulfuric odor, or the battery is swollen or deformed, it is time to take action. Does your vehicle battery is experiencing any of these symptoms? Then more than likely, it is nearing the end of it life and will need replacement soon.


Most of us will experience that helpless feeling of turning the key in your car. And pushing the ignition and the vehicle fails to start. The best way to avoid being strand with a dead car battery is proper maintenance. Battery maintenance is simple. In fact, it’s so simple, most car or truck owners never bother getting around to it. Simply visually inspecting the battery and cleaning off any dirt. Also, residue or corrosion as it accumulates can extend the lifespan of any car battery considerably. Do you have any questions or would like one of our ASE certified automotive technicians? Would you like them to inspect or service your vehicle’s battery? Feel free to contact us or stop by Carolina Auto Service today.

cabin filter

4 Reasons to Change Your Car’s Cabin Air Filter

As a car owner, it’s critical to keep up with your vehicle’s maintenance. It’s easy to forget certain tasks, such as replacing your cabin air filter. However, this is a car maintenance task that should not be skipped. Three top reasons to change your car’s cabin air filter regularly are listed here.

1. Follow Your Car’s Recommended Maintenance Schedule

First of all, keeping up with the recommended maintenance for your car is important. It might be required if you want to maintain your warranty coverage. Additionally, having maintenance records can help you sell your car later. Replacing your car’s cabin air filter is an essential part of keeping up with its regular maintenance.

2. Enjoy Improved Air Conditioning Performance

In the summer, making sure that your car’s air conditioning is working properly is very important. After all, without it, it’s going to be hard for you to stay comfortable while you’re in your car this summer. With a new cabin air filter, the air can move through your system like it’s supposed to. This will help you enjoy a cooler and more comfortable car this summer.

3. Improve the Air Quality Within Your Car

In addition to enjoying cooler air in your car, you can also enjoy improved air quality. Your cabin air filter helps filter out the air that travels through your car. If you or your family members have allergies, a new cabin air filter can help. It can even help with getting rid of unpleasant odors in your vehicle.

4. Avoid Wasted Fuel

Lastly, replacing your cabin air filter can help you avoid wasting fuel. If your air conditioner is able to work more efficiently, then it’ll help you save on fuel use. A new cabin air filter helps with efficiency and therefore helps you reduce fuel use. You don’t have to worry about not using your air conditioner to cut down on costs. Instead, you can continue using it without having to spend a lot of money.

Do not skip out on changing your car’s cabin air filter. This should be done approximately every 12,000 or 15,000 miles. If you aren’t sure, ask an automotive technician that you trust, or check your car’s maintenance schedule. If it’s time to change it, a technician can help. It’s usually a fast and affordable maintenance task, so there is no reason to skip.

oil change

Clues That Your Vehicle Needs an Oil Change

Routine oil changes are critical for vehicles of all kinds. They help guarantee optimal engine performance. Oil changes give vehicles to all sorts of positive factors. These include stronger gasoline mileage, reduced emissions and even enhanced engine longevity. Vehicle owners frequently go for oil changes in intervals of three months. They frequently go for them after driving 3,000 miles, too. If your vehicle is ready for an oil change, it may give off a number of clues.

oil change

Oil That’s Unclean

Fresh, high-quality oil typically is light yellowish to somewhat brownish in color. Unclean oil, on the other hand, is usually nowhere near as light. Engine particle and debris accumulation often darkens it considerably. The oil that needs switching in many cases has a noticeably sandy texture as well.

An Oily Odor

If the cabin of your vehicle gives off a noticeably oily odor, then that probably means that it’s ready for an oil change session. This is often a powerful and intense smell. It can often signify leakage, too. It’s frequently combined with exhaust fume or gasoline odors. It can denote vehicle overheating, too. This is never something that you should ignore. Engine overheating can be highly destructive to vehicles. It can sometimes bring on fires as well. People who notice oily odors need to take action and go for prompt oil changes.

Annoying Sounds

Oil in engines naturally degrades with the passing of time. Tired vehicle oil usually becomes denser as time goes on. Dense oil can interfere greatly with the lubrication of engine parts. That’s how it can lead to an engine that’s inordinately noisy. Lubrication breakdowns are often responsible for persistent and irritating engine sounds. If your engine is producing sounds that are making you want to go crazy, then you need to immediately request an oil change.

Acceleration That’s Oddly Slow

Engines that aren’t equipped with clean oil often experience acceleration that’s strangely slow. They frequently experience noticeable drops in power as well. When you notice that your vehicle’s acceleration is nothing like it normally is, then it most likely is waiting for you to get it some clean oil.

Exhaust Smoke

A small amount of tailpipe smoke generally isn’t a reason to panic. The release of tailpipe smoke is especially common in times of lower temperatures. If you pick up on an immoderate level of exhaust smoke, however, you should pay attention to the situation. It can be a signal of potential engine oil leakage. You should promptly assess the amount of oil in your vehicle. Leakage may be rapidly doing away with it.

Check Engine Light

Concentrate on the dashboard to your vehicle. Is the oil change light lit up? If it is, then that generally signifies that your system just isn’t equipped with adequate oil. When you observe this light, you should employ your dipstick in order to evaluate your oil amount. If your oil is lacking, you need to go for an oil change session without a minute of delay.

Metal Bits

The presence of metal bits can in some cases signify that you’re ready to go for an oil change session. Be on the lookout for extremely small bits of metal. They may be so small that you can barely see them. Note, though, that these bits are pretty common inside of engine oil. If you can detect them with your fingers, however, that may signify that something is amiss. Put gloves that are made out of latex on your hands. Attempt to massage the oil in the middle of your thumb and finger. If you can detect the presence of the metal bits, then that can point to engine issues that require prompt addressing.

Oil That Has a Strange and Cloudy Look

H20 and oil are a famously bad combination. These two fluids sometimes interact inside of vehicles. This leads to the development of a substance that has a cloudy look. A couple of different things can trigger this. An engine block that’s split can trigger it. A head gasket that’s no longer working in the correct manner can trigger it as well. You can assess the situation by gazing into your oil filler cap. If you see something that has a rather velvety texture, you need to stop by your local automotive shop as soon as possible.

Make an Appointment With Carolina Auto Service Today

Is your vehicle ready for an oil change with qualified and adept professional mechanics? Carolina Auto Service located in Winston-Salem, North Carolina can come to your rescue. Contact our trusted local automotive center as soon as possible to learn more about the terrific service options that are accessible to our customer base. Contact our helpful and cordial team at any time to schedule an appointment for an oil change.

Is Your Vehicle Due for Timing Belt Replacement?

Is Your Vehicle Due for Timing Belt Replacement?

There are so many components that contribute to reliable and safe vehicles. Timing belts are merely one example. These are internal combustion engine elements that manage engine camshaft driving needs. They’re sometimes called “cam belts” or “timing chains,” too. Unfortunately, timing belts don’t last forever. As they age, they also get weaker. Timing belt breakdowns can trigger the destruction of other parts of your car’s engine as well. You should follow your vehicle’s manufacturer recommended maintenance schedule and replace your timing belt accordingly. However, mechanical components can malfunction at anytime. This is why it’s good to know what to watch for when determining whether your vehicle might need a timing belt replacement outside the manufacturer’s recommendations. Dependable timing belts are essential for optimal engine performance and drivability.

Reduced Material

Belt deterioration is similar to tire deterioration in many ways. Reduced grip can lead to reduced traction. Reduced traction can promote the slipping of the timing belt. Slipping is particularly common in times of significant load applications. If you’re ever transporting a trailer from one location to another, slippage may be a possibility. Damp weather conditions can also boost the chances of slippage. If your timing belt experiences reduced material, then it may be 100 percent ready for replacement.

Difficulty Starting and Keeping Your Vehicle Going

Full alignment is necessary for timing belt operational success. Timing belts are actually pretty sensitive components. Timing problems can bring on all sorts of issues with your vehicle. They can bring on major starting troubles as well. Interference with the proper timing of all the specific elements that contribute to vehicle starting can make running a vehicle smoothly seem next to impossible. If starting your car recently has become a seriously stressful affair, you need to think about timing belt replacement as soon as possible.

A Timing Belt That’s Significantly Lengthier Than Before

Reduced material has the power to alter timing belt length significantly. This can force the tensioner to go past its boundaries. Thus, decreasing tension in general. Consequently your vehicle’s overall performance. If you’re enthusiastic about strong vehicle performance, you need to focus on timing belt length at all times.

Exhaust Troubles

Focus on an exhaust that’s giving off substantially higher amounts of smoke than before. If your exhaust is part of that category, a problem with your timing belt could be the root cause. This will force the engine to overexert itself. That’s because it will make an effort to surpass the rest of its elements. If you pick up on anything out of the ordinary with your vehicle’s exhaust, your timing belt may require replacement.

Conspicuous Cracking

Take a close look at your timing belt. Do you observe any hints of cracking? Cracks signify that your timing belt simply isn’t as strong as it should be. That means that you should replace it without a second of hesitation or questioning. Excessive timing belt cracks frequently point to immoderate deterioration.

Unusual Glazing

Does your timing belt have an odd glazing problem? If it does, you shouldn’t ignore it for a second longer. Look at the lower portion of your timing belt. Does it have a bizarrely gleaming and shimmering look? If it does, then that denotes belt rigidity. Belts that are rigid simply are unable to offer the required degree of adjustability. Mechanics can assess timing belts that have glazed looks. They can aim to put dents on belt surfaces. If nothing shows up at all, replacement is of the essence.

Power Loss

A faulty timing belt can bring on engine power loss, strangely enough. This occurs as a response to immoderate moisture levels. If high amounts of moisture get caught in the middle of the pulleys and the belt, belt hydroplaning can take place.

Alignment Woes

Is there anything amiss with the alignment of your timing belt? This kind of problem can suggest the breakdown of the internal elements that are associated with your tensioner. Tensioner breakdown can be hard to ignore as well. That’s because it can lead to significant and unpleasant noise. It can give off high amounts of heat. It can even cause major vibrations. If there’s anything wrong with your timing belt’s alignment, you need to take action and find out about replacement.

Get in Touch With Carolina Auto Service to Learn More About Our Timing Belt Replacement Services

You need a dependable timing belt in your life, end of story. If you detect any signs of trouble with your timing belt, you need to play it safe and get professional service. Get in contact with Carolina Auto Service in Winston-Salem, North Carolina now to set up an appointment for top-notch timing belt replacement service.

Call Us Today…..

» We Are Only A Phone Call Away «

(336) 765-8599


Why Routine Brake Service Is a Good Idea

Why Routine Brake Service Is a Good Idea

Routine Brake Service: What Can You Get Out of It?

Owning and driving a vehicle you can call your own is a privilege and honor. It’s also a major responsibility. If you want to be the epitome of a responsible driver, you have to take care of your vehicle properly. That involves a lot more than just parking it at night and washing it occasionally. It entails making sure that your vehicle is always 100 percent safe.

Your goal should be to make sure that your car is in tiptop shape at all times. A safe car proves that you respect your own well-being. It proves that you respect the well-being of the other people around you, too. Nothing means more than that.

Many different factors go into balanced vehicle safety. It can be smart to begin with brake service. Your brakes are a critical part of the functioning of your car. The brakes, in short, can halt your vehicle when necessary. They help you slow down when necessary, too. This is invaluable for safety purposes.

Brake Service Can Offer You Better Safety

It’s no secret that reliable brakes are essential for safe vehicle operations. If you want to make sure that your brakes are always safer than safe, professional service is your finest bet. Faulty brakes can make you more susceptible to dangerous collisions on the road. Brake failure is a major hazard that can lead to accidents of all sizes. It can frequently result in serious injuries and even fatalities.

If you notice anything amiss with your brakes, then you need to take your car in for professional attention without a second of hesitation. Brake pad replacement or repair work may be crucial.

Click Here Button

Brake Service Can Enhance the Longevity of Your Brakes

Routine brake maintenance is critical for people who want to maintain brakes that are in excellent and dependable shape for a long time. If you invest in frequent brake maintenance service, it can alert you to the need for new hoses, brake pads and small components in general. Replacing these elements is beneficial due to the fact that it can boost the strength of components of your vehicle that are a lot costlier. Replacing smaller elements can often keep your brake rotors and master cylinder in excellent working order.

If you notice any clues that suggest the deterioration of your hoses or brake pads, you should take care of them as soon as possible. Doing so can often protect you from brake problems that are a lot bigger and more complex. It can often safeguard your brakes overall and keep them working beautifully for a long while. If you want more brake mileage, routine service is the sensible approach.

Routine Brake Service Can Protect Your Bank Account

Brake service can often safeguard people from particularly time-consuming and serious brake problems. Severe brake problems often cost a lot to fix, too. If you want to be able to identify and take care of brake issues before they get the power to grow in intensity, then frequent service is optimal. Preventative maintenance can do so much for your peace of mind any time you’re behind the wheel. It can also keep your finances intact. No one likes the idea of spending a fortune on significant brake troubles.

Are Your Brakes in Strong Working Order?

It can be helpful to pay attention to your brakes at all times. Know the signs that denote issues with your brakes. They may alert you to the need for repair work or even replacement. This can keep you safe while you’re driving. You always want to steer clear of driving with problematic brakes. Nothing is ever worth that risk. If potential brake failure is in your future, you may hear strange squealing and grinding sounds. These sounds may suggest brake pad issues. Note, too, that tired pads frequently harm other vital brake components. That’s why you should never dismiss them.

There are a good number of other clues that can notify you of possible brake troubles. These clues include brake pedals that just aren’t as receptive as before, odd vehicle “tugging” actions during the braking process and braking vibrations. If you observe or experience any of these things, then you need to stop everything and take your vehicle in for service. You have no time to dillydally. Your safety is paramount. The safety of other drivers on the road with you is paramount, too.

Contact Carolina Auto Service in Winston-Salem Today

Are you searching for five-star professional brake service anywhere near Winston-Salem North Carolina? Get in touch with Carolina Auto Service today. Our mechanics are experienced brake service experts. They help drivers manage brake repair needs of all types. Contact us as soon as possible to reserve an appointment for our skilled assistance.

Click Here Button

Timing Belt Blog

Signs of Timing Belt Issues

The Importance of Vehicle Timing Belts

The timing belt of your vehicle refers to an internal engine element that’s responsible for the rotation of the crankshaft and camshaft. A reliable timing belt is critical for optimal and safe vehicle performance. A faulty timing belt can be a massive problem as it can lead to full engine failure. If you want to feel completely confident behind the wheel, you need to be able to recognize signs of potential timing belt issues. Note, too, that your engine simply won’t run without the assistance of a timing belt that’s in fine working order.

Material Loss

Rubber tires deteriorate with the passing of time. Timing belts are no different in this respect. When timing belts deteriorate, their gripping strength naturally goes down. This leads to slipping. Slipping can be particularly hazardous in times of damp weather conditions.

Ticking Sounds

Focus on your engine. Do you hear any kind of inexplicable ticking sound? If you do, the deterioration of your timing belt could be to blame. Pulleys connect timing belts to the camshafts and crankshafts of engines. Crankshafts give power to the connecting rods of engines. Note, too, that a strange ticking sound may signify reduced amounts of oil pressure. It may even indicate that your engine simply doesn’t have sufficient lubrication.


Click Here Button

Exhaust Issues

Has your exhaust been giving off way more smoke than usual? If it has, then timing belt trouble could be the culprit. This smoke can put a lot of strain on your engine. It can lead to a substantial jump in exhaust release as well.


Severely hot weather can bring on the cracking of rubber. Timing belts are often made using neoprene. They, because of that, are vulnerable to this kind of harm. Cracking is a sign that your timing belt is due for prompt replacement. It also denotes that your timing belt is vulnerable to frustrating breakage.

Power Loss

A faulty timing belt can trigger engine power loss, perhaps strangely enough. This occurs when immoderate amounts of moisture get caught in the middle of the pulleys and the belt. It can trigger the hydroplaning of the belt. It can force it to stop turning as well.

Tired Edges

Take a close look at your timing belt edges. Have they developed a tired and worn out appearance? Are you able to view interior filaments? If you are, then that means that you’re due for prompt timing belt replacement. This may be a response to alignment issues that involve the tensioners or the pulleys. It can also be a reaction to intense heat. If your belt comes into contact with severe heat, its edges may display the consequences.


Timing belts ideally are firm and tight inside of engines. Excessive tightness, however, is never good news. A timing belt that’s overly tight will lose the ability to make its way through its parts in the right manner. A timing belt requires a degree of adjustability. A belt that’s too rigid is much more prone to breakage.


Stretching is yet another warning signal. Although timing belts that are excessively rigid and tight are problematic, the opposite situation can be just as worrying. A timing belt that’s excessively loose is nothing to dismiss. It may not be able to travel correctly within your vehicle’s engine. Decreased tension can also negatively interfere with vehicle performance.

Oil Leakage

Oil leakage can sometimes point to a timing belt that’s in serious trouble. Engines often develop motor oil leaks. If you notice that your timing belt cover is leaking, don’t brush it off even for a second. That’s because it can lead to the overheating of your engine. It can also lead to unusually speedy timing belt wear and tear.

Engine Firing Problems

A tired timing belt may influence the fire rate of your engine. Timing belts are connected to pulleys that work in conjunction with camshafts and crankshafts. Note, though, that belts occasionally slide over the drives of camshafts. This can force cylinders to shut or open prematurely. This can potentially cause misfiring hassles. If you suspect that you have a misfiring situation on your hands, you need to take care of it without a hint of delay. Delaying taking care of this problem can in many cases bring on severe and lasting engine destruction.

Get in Touch With Carolina Auto Service As Soon As You Can

If you’re searching for top-quality timing belt replacement service, you can trust the team here at Carolina Auto Service. Our skilled technicians have extensive and in-depth timing belt replacement experience. We can provide you with the finest and most detail-oriented replacement work around. Reach out to Carolina Auto Service in Winston Salem, North Carolina today for additional information. We specialize in A+ automotive repair services of all varieties.

Click Here Button

Radiator Repair Winston Salem

Is Your Vehicle In Need of Radiator Repair?

Radiators: What Exactly Do They Do?

Anyone who drives knows just how critical vehicle radiators are. Radiators, in brief, keep engine overheating at bay. Engines that are in use create heat. Coolant soaks up this heat and promptly transmits it over to the radiator. This is precisely where all cooling takes place. After that, coolant travels all over the engine. If your radiator is in fine working order, everything should be smooth sailing. If it’s not, however, you could experience a number of difficulties. It’s vital to keep an eye out for any and all potential radiator concerns. Swift professional repair service can in many cases stop radiator issues from becoming more severe.

Leaking Coolant

Take a close look at the area right under your car. Do you see coolant? It may have a
conspicuous vivid green, pink or yellow color. Coolant is the aforementioned fluid that stops engine overheating. Coolant puddles frequently signify leakage. It’s wise to pay attention to your low coolant light, too. If it turns on, something is amiss.

Excessive Heating

Overheating is a big warning signal. If you experience overheating, then you need to take your vehicle in for professional repair service immediately. It’s not hard to recognize overheating, either. Look below your hood. Is there any steam coming out of the area? If there is, radiator issues are probably the culprit.

Rust or Discoloration on Your Radiator

Assess the appearance of your radiator. The presence of rust or discoloration may denote radiator trouble. Radiator leaks often lead to fluid making its way over to hot engine components. This fluid rapidly fizzes away. You may be able to spot evidence of the fluid, however, in the form of discoloration. This discoloration frequently turns into rust as well.

Dark Radiator Gunk

Radiator coolant tends to be reddish, pinkish, yellow or green. Radiator issues, however, can in some cases change things in the color department. Some radiator troubles frequently bring on the emergence of fluid contaminants that have the ability to drastically affect coolant appearance. If your coolant begins to take on a dark black or brown color, then you should give it your attention. Also, the substance after some time will turn into a thick gunk. It will also cease functioning normally. Dark radiator gunk calls for the need for swift replacement. If you don’t replace this coolant quickly, it could bring on severe and lasting transmission and engine problems.

A “Hot” Display on Your Temperature Gauge

Take a look at your dashboard’s temperature gauge. Also, focus on the needle. Is it moving toward the “hot” direction? If it is, there could be some type of radiator trouble. It can sometimes indicate low fluid levels. It can sometimes signify thermostat woes as well. Either way, you need to request service from a knowledgeable mechanic who can troubleshoot the matter.

Be Aware of Common Radiator Leak Signs

It’s important to be aware of things that may signify radiator issues in general. It’s just as important to know about things that can denote radiator leaks, too. Radiator leaks can point to all sorts of problems that require prompt attention. If you have a radiator leak on your hands, you may experience significant shifts in coolant levels. Your coolant levels may be markedly lower than in the past. Also, focus on the space right below your engine as well. Do you see any odd puddles? If you observe any strange and gooey puddles, radiator concerns could be responsible. Don’t go anywhere near these puddles, either. They can be extremely dangerous. It’s imperative to clean them thoroughly immediately. It’s just as vital to discard of the fluid in the appropriate manner. Your goal should be to keep it far away from people and pets.

Problematic radiator hoses can sometimes signify radiator leaks. Radiators are attached to hoses that are not immune to deterioration. These hoses tend to tire out as time goes on. Their associated clamps sometimes get loose, too. Engine movements and vibrations contribute to this looseness. Tired radiator hoses lead to leakage. The same goes for connections that are less than reliable. Also, it’s vital to focus on hoses and be attentive to potential protrusions and cracks. These imperfections call for prompt professional repair work.

Get in Touch With Carolina Auto Service As Soon As Possible

Vehicle radiator issues can bring on all types of headaches and inconveniences. They can sometimes even interfere with safety behind the wheel. If you suspect that something is wrong with your radiator, you need to invest in professional repair service as soon as possible. Don’t delay taking action. The sooner you do something about your radiator concerns, the sooner you can sleep soundly at night. Lastly, call Carolina Auto Service in Winston-Salem, North Carolina as soon as possible to make an appointment for our A+ radiator repair service.

Carolina Auto Service